SlimGem
Forum GOD!
Not at the moment. This razor is still a work in progress. Once I get around to finishing it, I'll probably make it available on a 3d sharing site. Thanks
3D printed shaving stuff
- Thread starter sɐǝɹpu∀
- Start date
SlimGem
Forum GOD!
The quality looks great! I think you'll appreciate the shallow angle. What blade are you using? I'm not having much luck with the gem blue stars.Just received my Triceratops. Very pleased.
Tomorrow's shave now planned.
Electrif
SE la vie
Thanks Roger. I'm blown away by your design (is that enough crawling?) and the print quality.
As for the blades, here in the UK, we are limited to the GEM by Personna, stainless steel PTFE coated blade, generally supplied by Connaught Shaving. Other blades are hard to come by.
Last edited:
SlimGem
Forum GOD!
Thanks! I can get GEM by Personna on Amazon. Will try those next. In the picture, the blade on the left started to rust after one use. Maybe stainless is the way to.
N_Architect
Travel, See, Feel, Explore
N_Architect
Travel, See, Feel, Explore
Also in wood PLA execution...
Beautiful, and I am told it will look absolutely fantastic with liquid glass resin coating.
Beautiful, and I am told it will look absolutely fantastic with liquid glass resin coating.
N_Architect
Travel, See, Feel, Explore
SlimGem
Forum GOD!
Very nice results! The green bowl looks like real ceramic and the wooden one looks like it just came off the lathe ready for sanding and staining. As far as the GEM razor, if you're referring to the Triceratops, I think Mr @Electrif and Mr @sɐǝɹpu∀ have given it a thumbs-up, and therefore I'm considering it final. If you prefer a mild GEM, I can upload a version with a slightly raised comb of about 0.1mm more to close the blade gap instead of changing the geometry at the front which is what forces the use of a shallow angle. But again, results will vary from printer to printer.
N_Architect
Travel, See, Feel, Explore
Thank you Roger.
No need as yet; if so I will PM you...
I am giving this a bit of time as there is plenty to explore.
My friend who is doing the printing of your bowl design says it is a very well thought out design, he referred to the lip provision so that the lather cannot easily escape the bowl.
No need as yet; if so I will PM you...
I am giving this a bit of time as there is plenty to explore.
My friend who is doing the printing of your bowl design says it is a very well thought out design, he referred to the lip provision so that the lather cannot easily escape the bowl.
Paper Plane
Forum GOD!
Possibly a daft question but, if you commission an item, say a razor, to be 3D printed, can you specify the colour? I suppose that would depend on who you get to do the work...
steve
steve
slapo
It's... alive!
Yep, I went for grey and just received it today.
SlimGem
Forum GOD!
My last GEM style razor design finally finished. This GEM SE Razor is designed to be 3d printed in resin only. Files are available for download on Thingiverse.
www.thingiverse.com
GEM Safety Razor for Resin Printing by rogerquin
This razor is designed for RESIN PRINTING ONLY. The razor uses GEM style blades and can be printed directly on the build plate without supports.To install the blade, carefully insert the corners of the blade edge in the blade-guard, then press-fit the blade's spine onto the indents of the...
www.thingiverse.com
slapo
It's... alive!
The Jade(d) Shovelhead? ;-)My last GEM style razor design finally finished. This GEM SE Razor is designed to be 3d printed in resin only. Files are available for download on Thingiverse.
GEM Safety Razor for Resin Printing by rogerquin
This razor is designed for RESIN PRINTING ONLY. The razor uses GEM style blades and can be printed directly on the build plate without supports.To install the blade, carefully insert the corners of the blade edge in the blade-guard, then press-fit the blade's spine onto the indents of the...
View attachment 80899View attachment 80900View attachment 80901