3D printed shaving stuff

[p.b]

My last GEM style razor design finally finished. This GEM SE Razor is designed to be 3d printed in resin only. Files are available for download on Thingiverse.

GEM Safety Razor for Resin Printing by rogerquin

This razor is designed for RESIN PRINTING ONLY. The razor uses GEM style blades and can be printed directly on the build plate without supports.To install the blade, carefully insert the corners of the blade edge in the blade-guard, then press-fit the blade's spine onto the indents of the...

www.thingiverse.com

View attachment 80899View attachment 80900View attachment 80901

That looks brilliant. The resolution look fantastic and the colour works beautifully.

 

[SlimGem]

That looks brilliant. The resolution look fantastic and the colour works beautifully.

Thank you! It turned out to be a fantastic shaver too.

 

[Mr Bigmem]

So got the feather razor designed by @SlimGem printed in resin.....don't mind the colour . My printer guy had some new resin in and offered to print it for free as a test for him and I got to see how it shaved for free so thought why not lol. Turns out to be a mild and effective shave so happy days i'll be getting it printed in clear resin next and offering this to the Mrs.

Next up two brush stands to match my two printed resin brushes. Very happy indeed.

 

[fredyx]

Thanks @SlimGem !! I printed the bowl and the Gem razor n PLA and they are awesome!! For the bowl I wouldn't had decreased the diameter in the inner top section to avoid the handle of the brush hitting it during the lathering process now and then. A "V" curved shape could be better.

 

[fredyx]

I'll post a video in my YouTube with your razor and bowl

 

[N_Architect]

Straight after the print process and following a little bit of sanding w/ sandpaper:



I assume this is wood PLA.
Liquid resin sealing will follow.

We thought of adding a step with an acrylic primer (for colour) prior to sealing it with liquid resin, but this idea was just abandoned (it's four of us).

I am also told the bowl lathers excellently.

 

[Electrif]

My last GEM style razor design finally finished. This GEM SE Razor is designed to be 3d printed in resin only. Files are available for download on Thingiverse.

You are one hell of an enabler. Transparent just ordered.

 

[p.b]

Thanks @SlimGem !! I printed the bowl and the Gem razor n PLA and they are awesome!! For the bowl I wouldn't had decreased the diameter in the inner top section to avoid the handle of the brush hitting it during the lathering process now and then. A "V" curved shape could be better.
View attachment 80955

Wow - you won't lose that in the dark!

 

[SlimGem]

Thanks @SlimGem !! I printed the bowl and the Gem razor n PLA and they are awesome!! For the bowl I wouldn't had decreased the diameter in the inner top section to avoid the handle of the brush hitting it during the lathering process now and then. A "V" curved shape could be better.
View attachment 80955

Wow! That looks awesome! The razor has a lot of detail on the handle, and the corner blade guards have a very tight tolerance. That's why it's recommended for resin printing. Hats off for pulling it off in PLA.

P.S. I have the STLs for the bowl without the in-turned lip. It's basically the opposite, the rim flares out. PM me if you like.

 

[SlimGem]

Straight after the print process and following a little bit of sanding w/ sandpaper:



I assume this is wood PLA.
Liquid resin sealing will follow.

We thought of adding a step with an acrylic primer (for colour) prior to sealing it with liquid resin, but this idea was just abandoned (it's four of us).

I am also told the bowl lathers excellently.

Great work! I really like the finish on the green bowl. I just might have to try that glass resin stuff.

 

[SlimGem]

You are one hell of an enabler. Transparent just ordered.

Lol... I think you'll appreciate the performance. And again, your feedback is most welcomed.

 

[SlimGem]

This is a set of replacement scales I re-designed out of a broken set. Files are available for download on Thingiverse.

Straight Razor scales for George Wostenholm I.XL & others by rogerquin

Replacement scales for George Wostenholm I.XL straight razor and others. If you only need blank scales, just mirror the blank scale in your slicer. For best results, print in resin. Please post your makes. Enjoy

www.thingiverse.com

 

[fredyx]

Wow! That looks awesome! The razor has a lot of detail on the handle, and the corner blade guards have a very tight tolerance. That's why it's recommended for resin printing. Hats off for pulling it off in PLA.

P.S. I have the STLs for the bowl without the in-turned lip. It's basically the opposite, the rim flares out. PM me if you like.

The razor holds very well the blade, taking into account the PLA was printed at 0.1 (should have tried 0,06). Thanks for the redesigned bowl I'll PM you right away!!

 

[fredyx]

Wow - you won't lose that in the dark!

True!! these are my first makes with my brand new printer, I bought black and yellow PLA.... I'll add more colours and ABS soon.

 

[SlimGem]

I while back, I purchased a more than useless Ever-Ready 400 brush handle just so I could duplicate it. I really like this brush.

Files are available for download on Thingiverse.

Ever Ready 400 Shaving Brush Handle by rogerquin

This Ever-Ready 400 shaving brush handle will fit a 20mm knot. For added weight, print at 100% infill. Please post your makes. Enjoy11/29/2020 Update:Added file "ever_ready_400_brush_handle_26mm_knot.stl" for a 26mm knot. Height is the same, just wider.

www.thingiverse.com