N_Architect
Travel, See, Feel, Explore
^^Thank you for that.
What knot size does this brush take, Roger?
21mm, I assume?
What knot size does this brush take, Roger?
21mm, I assume?
3D printed shaving stuff
- Thread starter sɐǝɹpu∀
- Start date
SlimGem
Forum GOD!
Yes, the opening is 21mm, 10mm deep.
N_Architect
Travel, See, Feel, Explore
Thank you.
fredyx
Forum GOD!
Good morning,
As promised a review of two models from @SlimGem and the HN Razor from Thingiverse:
View: https://youtu.be/yVqdQt_sLEE
As promised a review of two models from @SlimGem and the HN Razor from Thingiverse:
SlimGem
Forum GOD!
I made a small change to the two-piece 3d printed safety razor. I minimized the tension on the center tabs on the cap since the blade applies enough tension to keep it centered. This should require less post-processing. The files are available for download on Thingiverse.
www.thingiverse.com
DE Safety Razor by rogerquin
Please note: For structural integrity, print the head cap on its side. Supports are not needed. If you have trouble with it not sticking to the bed, use a raft.This is a two-piece safety razor for use with double edge blades. Post-processing requires breaking away the supports on the blade...
www.thingiverse.com
Last edited:
SlimGem
Forum GOD!
This 3d printed razor is an old design I finished almost three years ago. I wanted to make a genuinely adjustable GEM razor but it got complicated. The idea was to keep the blade stationary while making the plate slide in and out as you turn the handle. Instead, I made three interchangeable plates with different blade exposure. The files are available for download on Thingiverse.
www.thingiverse.com
Adjustable GEM SE safety razor by rogerquin
PLEASE NOTE: GEM style blades are specifically made for shaving. They are identical to the common single edge cutter blade you'll find at the hardware store. Hardware store blades are NOT for shaving.*For structural integrity, print the head on its side. Supports are not needed.This SE safety...
www.thingiverse.com
fredyx
Forum GOD!
What a neat design Roger!!I made a small change to the two-piece 3d printed safety razor. I minimized the tension on the center tabs on the cap since the blade applies enough tension to keep it centered. This should require less post-processing. The files are available for download on Thingiverse.
DE Safety Razor by rogerquin
Please note: For structural integrity, print the head cap on its side. Supports are not needed. If you have trouble with it not sticking to the bed, use a raft.This is a two-piece safety razor for use with double edge blades. Post-processing requires breaking away the supports on the blade...
View attachment 81060View attachment 81061View attachment 81062View attachment 81063
SlimGem
Forum GOD!
Nice! Hmmm, I wonder how that ornate handle would look on the Triceratops.
SeanC
Forum GOD!
That's a fine looking brush. Would it be particularly difficult to scale up for say a 26mm knot?I while back, I purchased a more than useless Ever-Ready 400 brush handle just so I could duplicate it.I really like this brush.
Files are available for download on Thingiverse.
Ever Ready 400 Shaving Brush Handle by rogerquin
This Ever-Ready 400 shaving brush handle will fit a 20mm knot. For added weight, print at 100% infill. Please post your makes. Enjoy11/29/2020 Update:Added file "ever_ready_400_brush_handle_26mm_knot.stl" for a 26mm knot. Height is the same, just wider.
View attachment 81044
SlimGem
Forum GOD!
It doesn't scale up very well, but it can be made wider to accommodate a larger knot. Do you happen to know how deep the hole needs to be?
SeanC
Forum GOD!
10mm would suffice thanks
SlimGem
Forum GOD!
File "ever_ready_400_brush_handle_26mm_knot.stl" has been added to Thingiverse thing:4668885. Thanks
Last edited:
SeanC
Forum GOD!
Perfect. This will be my first 3D printing commission
fredyx
Forum GOD!
Third day shaving with the HC Razor and it is amazing!!
www.thingiverse.com
Safety Razor HC by gvera
This is a simple safety razor that is 100% 3D printed. It does not require any screws or any other hardware (besides the blade itself). This was made as a challenge by my uncle who uses safety razors to shave. It may not be the best safety razor in the world but it works!It’s important to print...
www.thingiverse.com