3D printed shaving stuff

SlimGem · Nov 7, 2020

sɐǝɹpu∀ said:
The Schick Handle:

The Caerbannog - firsr shave later.
:

... and it turns out that the hinge for the slant is probably strong enough with two magnets.

Very very cool! With the center magnet being off-set, I'm sure it stabilizes the blade even more. Nice work

sɐǝɹpu∀ · Nov 7, 2020

SlimGem said:
Very very cool! With the center magnet being off-set, I'm sure it stabilizes the blade even more. Nice work

Thank you. Rock-solid. Those modern magnets are beasts.

SlimGem · Nov 8, 2020

3D Printed SE Safety Razor

I just uploaded the STLs for this razor on Thingiverse. The shave is somewhere between normal and aggressive using a Feather PRO super. Soon I'll upload more razor heads with different blade exposure.

Shaving SE Safety Razor by rogerquin

Please note: For structural integrity, print the head on its side. Supports are not needed.This is a two-piece SE razor that uses Feather Pro blades. It's easy to print, but it does benefit from a well-calibrated printer. Two razor handles and one razor head are included in the STL set.A word of...

www.thingiverse.com

sɐǝɹpu∀ · Nov 8, 2020

SlimGem said:
I just uploaded the STLs for this razor on Thingiverse. The shave is somewhere between normal and aggressive using a Feather PRO super. Soon I'll upload more razor heads with different blade exposure.

Shaving SE Safety Razor by rogerquin

Please note: For structural integrity, print the head on its side. Supports are not needed.This is a two-piece SE razor that uses Feather Pro blades. It's easy to print, but it does benefit from a well-calibrated printer. Two razor handles and one razor head are included in the STL set.A word of...

www.thingiverse.com

View attachment 79820 View attachment 79821 View attachment 79822 View attachment 79823 View attachment 79828

Very nice, thanks.
Next time I get stuff printed I'll add those.
I think I still have some of those blades.

sɐǝɹpu∀ · Nov 8, 2020

And I have published my "Classic Injector Razor Handle" design on thingiverse.

Classic Injector Razor Handle by riverrun

A razor handle based on the classic handles of the Schick Type E/G razors from 1935-1955Either to be used as a replacement for broken vintage handles or as a base for modern 3D printed razors.

www.thingiverse.com

Either as a replacement for broken Schick E/G handles or as a basis for the Caerbannog and other razors.
I have decided that the "Caerbannog" text on the handle had to go.
The handle will be plain.

Free for non-commercial use.

The Caerbannog Head will follow soon.

Grarea · Nov 8, 2020

oh dear oh dear
I was thinking i am soon to the point i will reduce my razor count...........

sɐǝɹpu∀ · Nov 8, 2020

Grarea said:
oh dear oh dear
I was thinking i am soon to the point i will reduce my razor count...........

It could be worse.
Those 3D printed razors won't break the bank, unlike "artisan" stainless steel razors

Grarea · Nov 8, 2020

lol,
like i would buy those.....
All of mine are cheapy used ones.
Much fun has been had, but now there is more to come, especially as I have now set up my printer in a permanent position

sɐǝɹpu∀ · Nov 8, 2020

Talking about fun...
I use OpenSCAD to design my stuff and so does this guy - pure genius! Brilliant! Love it!

Grarea · Nov 8, 2020

I will watch that.
I have seen this sundial before.
Absolute genius.
I am in complete awe.
That is the incredible thing about 3d printing.
Like with your razors, it allows real cheap testing of innovative design.
Fantastic.

slapo · Nov 8, 2020

sɐǝɹpu∀ said:
Talking about fun...
I use OpenSCAD to design my stuff and so does this guy - pure genius! Brilliant! Love it!

Oooh, script-only 3D modelling... hehe... ehehehe...

Cheers.

sɐǝɹpu∀ · Nov 8, 2020

slapo said:
Oooh, script-only 3D modelling... hehe... ehehehe...

Cheers.

Everything I design is script-only
Luckily "put Tom's razor-head here" is part of the scripting language

SlimGem · Nov 11, 2020

This 3d printed Rocnel SE was more of a curiosity build. I don't own a Rocnel SE so, this is as close as I can get to duplicating one from looking at pics on the web. The first print had a slightly narrower channel and not a lot of blade exposure. Though I think this razor is more of a novelty, I was surprised at what good of a shave I got with this little thing. The attached illustration has a deeper channel and just a bit more blade exposure.

sɐǝɹpu∀ · Nov 11, 2020

The files for the Caerbannog capless razor are now available for non-commercial use:

Caerbannog Capless SE Razor by riverrun

While discussing the Wabbit razorhttps://www.thingiverse.com/thing:4617579I had the idea that the razor might not need a cap at all.Tom White liked the idea and agreed to make the necessary modifications to the head of the razor.The razor uses my "Classic Injector Razor Handle"...

www.thingiverse.com

You'll also need to print the handle:

Classic Injector Razor Handle by riverrun

A razor handle based on the classic handles of the Schick Type E/G razors from 1935-1955Either to be used as a replacement for broken vintage handles or as a base for modern 3D printed razors.

www.thingiverse.com

You will also need:

Three 3mm × 2 mm round magnets of grade N52
Superglue for the magnets and the handle
A small file in case the tabs are a smidgen too tight
An injector blade

Electrif · Nov 11, 2020

SlimGem said:
This 3d printed Rocnel SE was more of a curiosity build. I don't own a Rocnel SE so, this is as close as I can get to duplicating one from looking at pics on the web. The first print had a slightly narrower channel and not a lot of blade exposure. Though I think this razor is more of a novelty, I was surprised at what good of a shave I got with this little thing. The attached illustration has a deeper channel and just a bit more blade exposure.

View attachment 80012 View attachment 80013

As an owner of a Rocnel SE open comb, I can attest to the uniqueness of this razor.
Your homage looks impressive. Your eye for detail is excellent.